| |
| > |
Part Number: T-1000C System |
|
| |
Features:
1. 256 Gray，Gamma correction processing software。
2. Support the rules and special-shaped handle.
3. Controller, a port output, may bring 1024/2048 light.
4. Off-line control, play back content stored in the SD card
5. T-1000C store a maximum of 16 documents
Note: T-1000C-port 512 lights, the playback speed of up to 30 frames / sec, the port more than 512 lights, the frame rate with the increase in the number of lights automatically reduced.
Appearance:
| 7.5V—24V |
DC power input, to provide two sets of power input, select a group can be. |
| 5V |
Power Ground. |
| GND |
Error indicator |
| ERROR |
Power LED |
| POWER |
SD card slot |
| SD CARD |
Output CLK |
| CLK |
Output DATA |
| DAT |
Signal Ground |
| GND |
|
B
A |
Compatible with DMX signal, differential A, and differential B |
| GND |
Signal Ground |
Regulatory function button:
| SET |
Save Settings to save current settings file and the playback speed |
| MODE |
Switch File |
| SPEED+ |
Speed up the playback speed |
| SPEED- |
Slow down the playback speed |
|
|
|
| > |
System architecture diagram |
|
| |
Specific parameters:
Memory Card:
Type:SD Card
Capacity:256MB—2GB
File Format:FAT file format
Store files:*.led
Physical parameters:
Weight:0.2kg
Size:122mm*67mm*25mm
Temperature :-20℃—85℃
Power Supply:AC 85V—264V
Power:3W
Note:
To copy files to SD card, you must first format to the SD card, pay attention to is that each copy must be formatted before.
SD card must be formatted as "FAT" format.
Controller on the SD card can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply controller.
|
|
|
